Alexor PC9155D-433 Guida di Installazione Scaricare il pdf (Pagina 70)

PC9155 Wireless Alarm System

5-46

[999] Restore Factory Default Programming

All programming, including wireless device programming, returns to the factory defaults.

[] Keypad Programming

To enter Keypad Programming press [][8][Installer Code][]. Keypad sections require 3-digit entries and only affect the keypad used to program them.

[000] Local Keypad Function Key Programming

This section is accessed by entering [][000] from Installer Programming. This section is used to program the keypad function keys. Enter digits 1 to 5 to select the

function key (F1-F5) to be programmed followed by a 2-digit entry to assign a function to the key. The system will return to the key selection screen (in section

[000]). Changes to this programming section affect only the keypad used to program the changes.

Function Key Options

Function keys must be held for 2 seconds to perform the described function.

Function keys will only perform the intended function if the system is not busy.

Pressing function keys programmed with option numbers designated “For Future Use” causes the keypad to display “Function Not Available” and

sound an error tone.

Null Key: (Not Used) The key does not perform any function or give any acknowledgement beeps when pressed.

01-02

For Future Use

Stay Arm: The system arms with all Stay/Away and Night zones auto-bypassed even if delay zones are violated during the exit delay. This key only

works while the system is disarmed, or armed in the Away mode. The panel logs “Armed in Stay Mode” for this closing type. If there are no Stay/Away

zone types programmed on the system, the system arms in Away mode, and the panel logs “Armed in Away Mode”.

Away Arm: The system arms with all Stay/Away and Night zones active even if no delay zones are violated during the exit delay. This key only works

while the system is disarmed, armed in the Stay or Night Mode, or during the Exit Delay during Away Arming. The panel logs “Armed in Away Mode”

for this closing type.

05 No-Entry Arm [][9]: After pressing this key, entry of a valid access code is required. The system arms with No Entry on Delay zones and all Stay/

Away and Night zones are auto-bypassed even if delay zones are violated during the exit delay. The exit delay is silent for this arming type. This key

can be used in the armed or disarmed state to allow the user to turn Entry Delay on and off. Entry of a valid access code is required after pressing this

key to perform the function when the system is disarmed.

06 Chime ON/OFF [][4]: This key enables (3 beeps) and disables (steady tone) the chime. It functions similarly to entering [][4]. This key functions

when the system is armed or disarmed.

For Future Use

08 Bypass Mode [][1]: Pressing this key puts the keypad in the Zone Bypass mode. It is similar to entering [][1] while disarmed. If an access code is

required for bypassing (Section [015] Option [5]), the user must press the function key to enter bypass mode then enter the access code before entry is

permitted. This key only works while the system is disarmed.

09-12

For Future Use

13 Command Output #1 [][7][1]: Pressing this key is the equivalent of entering [][7][1] to activate the associated PGM. An access code may be

required before the output is activated, depending on attribute 5 of the output. This key works whether the system is armed or disarmed.

14 Command Output #2 [][7][2]: Pressing this key is the equivalent of entering [][7][2] to activate the associated PGM. An access code may be

required before the output is activated, depending on attribute 5 of the output. This key works whether the system is armed or disarmed.

For Future Use

16 Quick Exit [][0]: Pressing this key performs the Quick Exit function and is the same as entering [][0] while armed. This key only works while the

system is armed. The Quick Exit feature must be enabled (section [015] Option [3]).

17 Activate Stay/Away Zones [][1]: Pressing this key removes (or re-enables) the automatic bypass on all Stay/Away zones on the system. It is the

same as entering [

][1] while armed. If Night zones are programmed, the system arms in night mode if this key is pressed while stay armed. If no

Night zones are programmed, the system arms in Away mode. The panel logs the appropriate arming log to the event buffer. If armed in Night or Away

mode, this key switches the system back to Stay mode. Pressing this key does not switch the system from Night to Away. This key only works when the

system is armed.

18-24

For Future Use

Instant Stay Arm: This feature operates similarly to the Stay arming function key except for the following: When this function key is pressed for 2

seconds, no acknowledgement beeps are sounded, there is no exit delay, and the system arms immediately. The panel logs “Armed in Stay Mode” for

this closing type. If no Stay/Away zone types are programmed on the system, the system arms in Away mode with an audible exit delay (for the dura-

tion programmed in section [005]), and the panel logs Armed in Away Mode.

Note: This function key should not be used on CP-01 panels.

26-32

For Future Use

Night Arm: The system arms with Night zones auto-bypassed even if delay zones are violated during the exit delay. This key only works while the

system is disarmed or armed in the Stay Mode. The panel logs Armed in Night Mode for this closing type. If no Night zone types are programmed on

the system, the system arms in Away mode with an audible exit delay (for the duration programmed in section [005]), and the panel logs Armed in

Away Mode. The function key must be pressed for 2 seconds. No acknowledgement beeps are sounded and the exit delay is silent.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 87 88

Commenti su questo manuale

Nessun commento

Alexor PC9155D-433 Guida di Installazione Pagina 70

Commenti su questo manuale

Prodotti e manuali riguardandi Sistemi di controllo di accesso Alexor PC9155D-433